��|� 
�
!
����
�
6�
(�
"(=K0���
��
�
���v :6R(�&�A�1 M
	

  -4  force usage of the IPv4 protocols family
  -6  force usage of the IPv6 protocols family
  -b  specify the block bytes size (default: 1024)
  -d  wait for given delay (usec) between each block (default: 0)
  -e  perform a duplex test (TCP Echo instead of TCP Discard)
  -f  fill sent data blocks with the specified file content
  -h  display this help and exit
  -n  specify the number of blocks to send (default: 100)
  -V  display program version and exit
  -v  enable verbose output

  -A  send TCP ACK probes
  -d  enable socket debugging
  -E  set TCP Explicit Congestion Notification bits in TCP packets
  -f  specify the initial hop limit (default: 1)
  -g  insert a route segment within a "Type 0" routing header
  -h  display this help and exit
  -I  use ICMPv6 Echo Request packets as probes
  -i  force outgoing network interface
  -l  display incoming packets hop limit
  -m  set the maximum hop limit (default: 30)
  -N  perform reverse name lookups on the addresses of every hop
  -n  don't perform reverse name lookup on addresses
  -p  override destination port
  -q  override the number of probes per hop (default: 3)
  -r  do not route packets
  -S  send TCP SYN probes
  -s  specify the source IPv6 address of probe packets
  -t  set traffic class of probe packets
  -U  send UDP probes (default)
  -V  display program version and exit
  -w  override the timeout for response in seconds (default: 5)
  -z  specify a time to wait (in ms) between each probes (default: 0)

  -A  send TCP ACK probes
  -d  enable socket debugging
  -E  set TCP Explicit Congestion Notification bits in probe packets
  -f  specify the initial hop limit (default: 1)
  -g  insert a route segment within a "Type 0" routing header
  -h  display this help and exit
  -i  force outgoing network interface
  -l  set probes byte size
  -m  set the maximum hop limit (default: 30)
  -N  perform reverse name lookups on the addresses of every hop
  -n  don't perform reverse name lookup on addresses
  -p  override source TCP port
  -q  override the number of probes per hop (default: 3)
  -r  do not route packets
  -S  send TCP SYN probes (default)
  -s  specify the source IPv6 address of probe packets
  -t  set traffic class of probe packets
  -V, --version  display program version and exit
  -w  override the timeout for response in seconds (default: 5)
  -z  specify a time to wait (in ms) between each probes (default: 0)
Cannot find user "%s"Cannot run "%s": %mCopyright (C) %u-%u Pierre Ynard, Remi Denis-Courmont
Copyright (C) %u-%u Remi Denis-Courmont
Try "%s -h" for more information.
Warning: "%s" is too small (%zu %s) to fill block of %zu %s.
Written by Pierre Ynard and Remi Denis-Courmont
Written by Remi Denis-Courmont
Project-Id-Version: ndisc6
Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>
PO-Revision-Date: 2011-08-20 10:01+0000
Last-Translator: FULL NAME <EMAIL@ADDRESS>
Language-Team: English <en@li.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Plural-Forms: nplurals=2; plural=n != 1;
X-Launchpad-Export-Date: 2022-08-18 13:03+0000
X-Generator: Launchpad (build 87919ae1fbf1142b0e02b80650e6ccf3e775beb3)

  -4  force usage of the IPv4 protocols family
  -6  force usage of the IPv6 protocols family
  -b  specify the block bytes size (default: 1024)
  -d  wait for given delay (µsec) between each block (default: 0)
  -e  perform a duplex test (TCP Echo instead of TCP Discard)
  -f  fill sent data blocks with the specified file content
  -h  display this help and exit
  -n  specify the number of blocks to send (default: 100)
  -V  display program version and exit
  -v  enable verbose output

  -A  send TCP ACK probes
  -d  enable socket debugging
  -E  set TCP Explicit Congestion Notification bits in TCP packets
  -f  specify the initial hop limit (default: 1)
  -g  insert a route segment within a “Type 0” routing header
  -h  display this help and exit
  -I  use ICMPv6 Echo Request packets as probes
  -i  force outgoing network interface
  -l  display incoming packets hop limit
  -m  set the maximum hop limit (default: 30)
  -N  perform reverse name lookups on the addresses of every hop
  -n  don’t perform reverse name lookup on addresses
  -p  override destination port
  -q  override the number of probes per hop (default: 3)
  -r  do not route packets
  -S  send TCP SYN probes
  -s  specify the source IPv6 address of probe packets
  -t  set traffic class of probe packets
  -U  send UDP probes (default)
  -V  display program version and exit
  -w  override the timeout for response in seconds (default: 5)
  -z  specify a time to wait (in ms) between each probes (default: 0)

  -A  send TCP ACK probes
  -d  enable socket debugging
  -E  set TCP Explicit Congestion Notification bits in probe packets
  -f  specify the initial hop limit (default: 1)
  -g  insert a route segment within a “Type 0” routing header
  -h  display this help and exit
  -i  force outgoing network interface
  -l  set probes byte size
  -m  set the maximum hop limit (default: 30)
  -N  perform reverse name lookups on the addresses of every hop
  -n  don’t perform reverse name lookup on addresses
  -p  override source TCP port
  -q  override the number of probes per hop (default: 3)
  -r  do not route packets
  -S  send TCP SYN probes (default)
  -s  specify the source IPv6 address of probe packets
  -t  set traffic class of probe packets
  -V, --version  display program version and exit
  -w  override the timeout for response in seconds (default: 5)
  -z  specify a time to wait (in ms) between each probes (default: 0)
Cannot find user “%s”Cannot run “%s”: %mCopyright © %u-%u Pierre Ynard, Rémi Denis-Courmont
Copyright © %u-%u Rémi Denis-Courmont
Try “%s -h” for more information.
Warning: “%s” is too small (%zu %s) to fill block of %zu %s.
Written by Pierre Ynard and Rémi Denis-Courmont
Written by Rémi Denis-Courmont